Medicine cabinet mod

[DandK]

Added two pieces to our 2010 zinger ZT19RD medicine cabinet. As the wife pointed out, due to motion when traveling things would probably fall out of the cabinet when weopened the door.

These two pieces were cut fromkitchen cabinet filler bought at Home Depot. They are pretty much the exact width and color we needed. Pieces were glued into place with carpenters glue.

[fixit5561]

the picture isnt showing

[DandK]

Added two pieces to our 2010 zinger ZT19RD medicine cabinet. As the wife pointed out, due to motion when traveling things would probably fall out of the cabinet when weopened the door.

These two pieces were cut fromkitchen cabinet filler bought at Home Depot. They are pretty much the exact width and color we needed. Pieces were glued into place with carpenters glue.



Sorry about the picture not showing up, I am new at this picture thing. Second try at the pic, hope this works.

[fixit5561]

yes your picture is coming through. It looks great! Looks also like I have a mod to do this winter!!



Thanks for putting the picture up

[Stan]

What we did for this problem is not as nice as the added wood. We bought some small tension rods made for cabinets. They are spring loaded so they stay in place in front of the "stuff" we carry in the cabinet. Works fine for us.

[coastn]

What Stan said.



Very nice mod, though.

[cwit]

That is what the factory should of done. I did the same on mine. Your mod looks factory, nice job.