I have a 2012 Crossroads 32QB Slingshot, the jack knife sofa has seen better days. I want to replace with a sofa a got from a friend from a 2014 Keystone Bullet .It is the same width 60" but has a different mounting style. It has a notch saddle . Has anyone out there run into this type of mounting style. Trying to figure out the frame work to attached to the slide out.
We replaced our dining table with a second couch. Just took the screws out of the table and set the couch in place. That's the way the original couch was done. Never thought about securing it. If the couch moves it's only about two feet to the couch on the other side and there's usually an ice chest in between when we travel.
Pic of newer couch:
__________________
Trailer: 28' 2014 Cruiser Aire 28rl fifth wheel
Truck: 2017 Ram 2500 4X4 with 6.7 L Cummins Diesel.
We replaced our dining table with a second couch. Just took the screws out of the table and set the couch in place. That's the way the original couch was done. Never thought about securing it. If the couch moves it's only about two feet to the couch on the other side and there's usually an ice chest in between when we travel.
Pic of newer couch:
So how exactly are the couches fastened? I want to replace my 2 recliners and center console with 2 household recliners. The finish has failed badly.
__________________
2015 Crossroads Cruiser 305RS
2012 Ford F250 6.7 Diesel
<---- My other RV is a Vans Aircraft RV9A