frame

[MNSparky]

I have a 2008 crossroads cruiser cf31mk. One of the jack legs for the landing gear is stripped out and needs to be replaced but, I can't find the frame manufacturer so I can order a new jack.Can anyone tell me where I can find that information, we purchased the 5th wheel used and didn't get much paperwork with it.

[geondebi]

my best guess it is Lippert. CR as used their frames for a long time.

[Stan]

I agree with George and Debi. Raising the gear too high is a big no-no and leads to damaged gears. Paint a stripe on the legs once fixed and don't raise them beyond that point.

[cruzr4-2]

We had a front leg fail on our 2006 29RE and they were Atwood.Our problem was that one leg bound up internally. Because they had changed the ratio of the acme thread in the leg of the current onesI could not just get one and make it work.
Ended up buying a complete assy less the electrics. I think around 300$ so now I have a spare gear box which there have been a few problems with also.
Found the assembly at a RV parts supply house in Tualatin, Or.
I can get you the name if interested but I would think you could fine what you need locally
good luck
Dennis

[gball]

You may find what you are needing on this website.

http://store.lci1.com/jacklevelingla...-legs-c37.aspx

Edited by: gball