If your bedroom and outside speakers won't work

[markgable]

Thought this might be helpful to someone. If you have the Jensen AWM975 unit in your entertainment center, and you press the A, B, or C zones and two of the three will not work, here is something I discovered.
My bedroom and outside speakers would not work so I figured it was faulty wiring. The solution was simple, the Fader and the Balance must be set to "0" within the audio controls or it will block the other zones from playing.
Push the "Volume" knob, and with each push it will scroll through Bass, Treble, Fader and Balance. Set your Balance and Fader to "0" and check to see if your zones begin to work. Worked for me!
Hope this helps someone!

[Chiveon]

I'm going to give this a try our first weekend out. Hopefully I'll get sound from the TV

[Papa-T]

Good info. I will check mine when I pick it up on Monday.

[Steve7]

I never got my tv to play through roof speakers. I'll give that a try, thanks!

[ewbldavis]

A tip: We use the fader to adjust volume levels of inside speakers when used with the outside ones (inside gets loud compared to outside volume).

[CampMacKay]

For you guys looking for sound from the TV, we didn't have sound from the TV, to the trailer speakers, until I connected from the TV audio out to the Aux in, on the Jensen unit. This is not done at the factory during install, that I have ever seen. Simple upgrade though.