I googled it on our first unit. Here is the deal: You cannot use satellite thru the single factory coax because the satellite signal will not go "thru" the booster circuitry.
On our 2012, we added a male/male adapter to the faceplate and moved the WHITE wire (this was the one from the rear cable jack) to this adapter.
On our 2014, the jack/faceplate is inside the upper cabinet above TV swivel. Actually, the wire was long enough that I pulled it thru an opening in the side panel, and hooked it to a male/male adapter.
I have also purchased an IR repeater. The repeater has a sensor that will go by TV, and mount to receive, which will allow us to put receiver in upper cabinet and keep doors closed.
We open up tomorrow (WOOO HOOO). I will snap a couple pics of the whole setup and post them in this thread.