Hand crank stabilizers?

[Susan]

I have a 2014 Sunset trail 32 rl and my rear stabilizers are stuck in the up position. It is at the repair place but the hand crank I have does not have any notches in it. Does anyone have a picture of what came with yours? Repair man said it was suppose to come with one and the folks who I bought it from were not very helpful. Thanks!

[woodwalker]

Is there not a nut on the end you can use a cordless drill to raise and lower. Rv dealers or camping world should have what you need

[ridgerunner69]

No it's different the end is slotted.

[Steve7]

Here are the two I received. They are for the stabilizer jacks, the awning and the front Jack I believe. Haven't had to use yet (knock on wood) and haven't checked which go to which. You should be able to tell by looking at your nut, etc.

[4kids2dogs&RV]

Originally Posted by Steve7

Here are the two I received. They are for the stabilizer jacks, the awning and the front Jack I believe. Haven't had to use yet (knock on wood) and haven't checked which go to which. You should be able to tell by looking at your nut, etc.

The 1 on the right is for the stabilizers. Used mine a few months ago for the first time when I sheared the motor pin.

[markandkim]

One on left is for the stabilizers and one on the right is for the slides.

[Steve7]

Ok...I just got set up and looked at my stabilizers. For me, the one on the right is for the stabilizers. And just FYI, I understand you need to unplug the stabilizer motor if you do it by hand. John can probly comment on that since he said he had done it.

[Susan]

Originally Posted by Steve7

Ok...I just got set up and looked at my stabilizers. For me, the one on the right is for the stabilizers. And just FYI, I understand you need to unplug the stabilizer motor if you do it by hand. John can probly comment on that since he said he had done it.

Thanks everyone! Camping world did have one that fits on a drill.