ST 32 BH question

[Hoov7]

Folks while De-winterizing the new camper today, looks like my tank release levers are marked incorrectly. The front handle is marked Black (Sewage Holding) and the rear handle is marked Grey (Waste Water) but when draining the tanks work opposite. To confirm I used the Black Tank flush and water came out with grey water valve open. Any comments would be helpful.

[Stan]

Not surprising. To me you have two options: Have the dealer correct it under warranty or get new decals and re-lable the handles. I would have the dealer correct it and also actually verify all the plumbing is correct under the unit.

[cw3jason]

My 28 BH was the same. I just peeled off the labels and stuck them in the correct spot

Sent from my SM-G900V using Tapatalk

[Tim D]

My Black tank is the "forward" handle and grey is the "rear" handle and labeled as such. Other than changing labels I would doubt dealer doing anything.

[Lloyd]

I would want to make sure which ever tank is the black tank is in fact the one that has the vent pipe coming out of it.

[harley]

factory just labelled them wrong ..take pics and send to someone at factory to complain. they need to know they did something wrong. Send to dealer also ...they should have noticed it when prepping..they need to know they missed something.

[coastn]

Industry problem. Same thing happened on my Canyon Trail. Swapped labels, everything's fine.

[Bert]

I have a 32BH and the grey tank is on the left and the black is on the right. Swap the stickers someone made a mistake.

[Hoov7]

Thanks for the replies, pretty much was I thinking just move the labels. Not coming off so easy but we have a nice label printer on the computer so I can make some.

[harley]

paint the grey tank handle grey,and leave the black handle black.