2010 Zinger ZT29DS Converter Location

[TexSon]

So I finally ran a cable for shore power but my battery is not charging. It looks like all breakers/fuses on the panel are good which leads to the converter being bad. Does anyone know where the converter is located on the 2010 Zinger ZT29DS?

Thanks!

[harley]

That thing with the fuses and breakers IS the converter. Did you check the 2 40 a(or 30A) fuses that are kinda hidden in there?

[TexSon]

I know that is the power distribution panel, but haven't taken it apart to see if the converter was behind it or not, and there is no fan vent on it. Based on other posts, the converter is in various locations depending on the RV/TT. With the heat the converter puts out, I do expect to see a vent. I have checked the fuses and breakers but will try resetting/re-seating them all again to see if that makes a difference before I take things apart.

[Burgy]

Do you get power FROM the battery? If not i recall there being fusable links on the frame near it.

[TexSon]

Harley, I owe you an apology the converter was, thankfully, behind the power distribution panel. I am going to have to replace it.

Burgy, yes I do get power from the battery. It is the converter that is the issue. I get main power from the shore power line and battery when I charge the battery itself.