bed room slide

[capecod cruiser]

just opened cruiser for season all slides opened but bedroom it moved about 1 in on one side and stoped looked like it was crookeddont see any thing interfearing any ideas 1st trip friday

[BipeFlier]

Is it the older style slide or the newer one with the aluminum tracks?



The newer Swintek (sp) are known for skipping teeth and getting bound up.



Need to see your dealer.

[capecod cruiser]

its a 20012 unit thanks for reply

[NorskeNY]

If it is the<i style="margin: 0px; padding: 0px; border: 0px; outline: 0px; : transparent;">Schwintek in wall slide system </span>the motors can be disconnected and the slide pushed in and re-aligned.</span>[/i]</span>
<i style="margin: 0px; padding: 0px; border: 0px; outline: 0px; : transparent;">
</span>[/i]</span>
<i style="margin: 0px; padding: 0px; border: 0px; outline: 0px; : transparent;">http://www.lci1.com/</span>[/i]</span>
<i style="margin: 0px; padding: 0px; border: 0px; outline: 0px; : transparent;">Towable RV and then slide systems.</span>[/i]</span>
<i style="margin: 0px; padding: 0px; border: 0px; outline: 0px; : transparent;">You will find info on the Schwintek and other systems.</span>[/i]</span>

[dminer04]

On the crossroads website go under helpfull links. There should be somevideos how to reset and fix the problem. Also call up LCI they are very helpfull.

[Flathead]

I was told by Randy at the factory, that if the tracks become misaligned, that the procedure to reset them is as follows:
If the slide is all the way in, open the slide about six inches and then bring it back in and let the motor "strain" a little. Repeat the procedure about four or five times.
This will also work if the slide is all the way out. Just bring the slide in about six inches and then all the way back out till the motor strains again. Repeat four or five times.
According to Randy, this is the procedure they use at the factory to realign the slide units when they come in for "adjustment".

[PARTSGUY]

if i pull two mtrs off top of rack and push room out manul do i put motors back in to loc roomor block it

[NorskeNY]

Originally Posted by PARTSGUY

if i pull two mtrs off top of rack and push room out manul do i put motors back in to loc roomor block it

I think there are two options:

1. Disconnect the motors to move the slide and then reconnect them to lock the slide.

2. Disconnect the power to the motors, move the slide and then reconnect the power to the motors to lock the slide.


I think option 1 is what can been seen on the Lippert videos.







Edited by: NorskeNY

[PARTSGUY]

I WATCHED THE VIDO ON THE REMOVEABLE OF MOTORS I THINK THE VIDIO WAS MADE BEFOR THEY PUT MY CRUISER TOGETHER MAN WHAT A JOB TOREMOVE CANT FIND SCREW THEY TALK ABOUT TO REMOVE MTR FOR ONE THING STILL HAVE RT SIDE SLIDE OUT MOTOR PROBLEM