Hello, we just bought a used Cruiser 32 BL 3 slides. The slide in the master room has a crack under it about 7 in long right. There is also a very small crack in the bottom side corner of the camper where the slide meets flush when its pulled in. The slide works just fine, anyone have any ideas suggestions or similar problems?
__________________
Jayson and Jessica Fisher 2007 32 BL Crossroads Cruiser
I had the same crack under the bottom left corner of the bedrom slide. This is a known weak area and some manufacturers have done the repair straight from the factory. The fix is to cut a slot along the crack and install a "H" molding up the slot. You will need to remove the corner trim under the overhang to slide up the "H" molding. Contact CR and they can send the parts and instructions. I did mine about a month ago. You will need a Roto-Zip to cut the slot.
Linear Mode
