|
09-16-2018, 08:08 AM
|
#1
|
Weekend Camper
Join Date: Sep 2017
Location: IL
Posts: 32
|
electric awning problem
My electric awning will not retract sometimes and ive tried using the remote to retract the awning but that doesnt work either so its not a bad switch on the control panel. I just have to keep pushing the switch several times until it finally decides to retract. Any ideas what is wrong?
|
|
|
09-16-2018, 09:06 AM
|
#2
|
Seasonal Camper
Join Date: Jul 2017
Location: Saskatchewan
Posts: 417
|
If you have a DC meter, or DC electrical trouble light you could check if you have current between motor and switch when switch is pushed, if so then its closer to the motor, maybe motor connection, brushes, or armature,
__________________
2011 ST25RB SunSet Trail - RESERVE
Silverado LT Z71
|
|
|
09-16-2018, 01:37 PM
|
#3
|
Weekend Camper
Join Date: Sep 2017
Location: IL
Posts: 32
|
Quote:
Originally Posted by Aceallenk
If you have a DC meter, or DC electrical trouble light you could check if you have current between motor and switch when switch is pushed, if so then its closer to the motor, maybe motor connection, brushes, or armature,
|
I can hear a click sound when I push the switch in but I will check the current. Thanks
|
|
|
09-23-2018, 05:56 PM
|
#4
|
New Camper
Join Date: Oct 2016
Location: IN
Posts: 7
|
I had trouble two different times with the rear slide awning on our 2015 Cruiser. The awning failed to retract. I was able to perform an emergency closure both times by standing on a picnic table and connecting jumper cables to the motor feed wires.
Both times I tracked the problem to improperly installed wire blade crimps. The first time the crimp was under the slide directly behind where the motor wire passes through the slide wall and the second time was at the base of the awning slide arm. The wiring was manufactured with a short 2"-3" length of wire fed through the slide wall and then crimped to the wire feeding the awning motor and the wiring to the switch. I soldered the two connections and protected the connections with shrink wrap and have not had any problems since.
|
|
|
10-04-2018, 04:35 PM
|
#5
|
Weekend Camper
Join Date: Nov 2014
Location: Texas
Posts: 25
|
Good info share.
Mine acts up too. Very upsetting, I was thinking, when it fails me, I will get a spring loaded awing. But now I have a place to go troubleshoot and see if I have the same issue. Thanks for sharing.
|
|
|
10-19-2018, 12:14 PM
|
#6
|
Weekend Camper
Join Date: Jul 2018
Location: PA
Posts: 33
|
Where would you do this test
For those of us new to this troubleshooting idea Where would you put the DC Light or meter to check for the electric?
Pull the switch out. Or on the Arm someplace?
|
|
|
11-04-2018, 05:15 AM
|
#7
|
New Camper
Join Date: Jun 2017
Location: FL
Posts: 4
|
Quote:
Originally Posted by JW-DJhappyduo
I had trouble two different times with the rear slide awning on our 2015 Cruiser. The awning failed to retract. I was able to perform an emergency closure both times by standing on a picnic table and connecting jumper cables to the motor feed wires.
Both times I tracked the problem to improperly installed wire blade crimps. The first time the crimp was under the slide directly behind where the motor wire passes through the slide wall and the second time was at the base of the awning slide arm. The wiring was manufactured with a short 2"-3" length of wire fed through the slide wall and then crimped to the wire feeding the awning motor and the wiring to the switch. I soldered the two connections and protected the connections with shrink wrap and have not had any problems since.
|
Same here- I have a pic somewhere and it was the wife and I standing on the picnic table, holding our batter jumper, with screwdrivers in the jaws of the clamps. Pretty hilarious.
It turned out that my installers did not attach the wiring securely to the motor head. It had been installed a year prior. They were idiots.
|
|
|
11-12-2018, 07:25 AM
|
#8
|
Weekend Camper
Join Date: Aug 2014
Location: Texas
Posts: 95
|
my awning quit working after several yrs of working fine..... fuse was loose, fixed problem and have no idea how fuse worked itself loose after several yrs, but it did.
__________________
Greg and Criss
Pflugerville, Tx
2016 F-250 Powerstroke
2011 27' RLX
|
|
|
11-12-2018, 09:18 AM
|
#9
|
Seasonal Camper
Join Date: Jul 2017
Location: Saskatchewan
Posts: 417
|
Expansion/contraction, hot/cold. that constant movement is likely the culprit in working things loose, like that fuse. It's the nature of the beast between metal and electric current (heat). All we can do is play along and hope the whole camping weekend isn't shot when physics throws us a curve ball.. Then Mother Nature also like to be included into the mix and likes to contribute to a weak spot every chance she gets.. lol...
__________________
2011 ST25RB SunSet Trail - RESERVE
Silverado LT Z71
|
|
|
08-23-2019, 12:23 PM
|
#10
|
Weekend Camper
Join Date: Jul 2018
Location: PA
Posts: 33
|
Where is the Fuse locate I cant even find the maker of my awning. I think there is a sticker up under awning but I have to get a ladder to try & read it. Where would you troubleshoot the switch? Pull entire panel & match location of awning switch?
|
|
|
08-20-2020, 03:12 PM
|
#11
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Dometic 9100 convert from Power to Manual
I have a Dometic 9100 power awning. I’m not able to buy another electric motor because everybody is out of stock and it would take months to get. Is there a way I can make it a manual awning until I can get the electric motor? Can I put a spring rode in place of the electric motor like the manual awnings have? Please help.
|
|
|
08-20-2020, 03:46 PM
|
#12
|
Site Team
Join Date: Jun 2015
Location: mo
Posts: 2,110
|
__________________
2009 Seville VF32KS
2019 GMC Sierra 3500HD Crew Cab Denali.
6.6 Diesel standard box.
|
|
|
08-20-2020, 04:07 PM
|
#13
|
Site Team
Join Date: Sep 2012
Location: PA
Posts: 5,724
|
__________________
Mark & Susan
Lehighton, Pennsylvania
EAGLE HT FIFTH WHEEL | 30.5CKTS - '13 Ford F150 SCREW - PullRite Superslide - Roadmaster Active Suspension
Member - "Northeast Adventures RV Rally Group" & "Mason-Dixon Bunch"
|
|
|
08-20-2020, 04:36 PM
|
#14
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Yes this is what I need, but Dometic has a long wait for the Motor. So I was wanting to do something in the meantime until they were available. i go camping a lot.
|
|
|
08-20-2020, 05:05 PM
|
#15
|
Site Team
Join Date: Jun 2015
Location: mo
Posts: 2,110
|
The one on Amazon is in stock - 13 and delivery between 8/27 - 8/31.
__________________
2009 Seville VF32KS
2019 GMC Sierra 3500HD Crew Cab Denali.
6.6 Diesel standard box.
|
|
|
08-20-2020, 05:39 PM
|
#16
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Thanks for the info
|
|
|
08-21-2020, 07:35 AM
|
#17
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Domestic 9100
I want to make sure i test the motor before buying a new one. I should be able to connect the motor directly to a 12v power source for testing. Any thoughts ?
All this stopped working when I changed out my Awning fabric. The motor wasn't dropped or anything just stopped working. but I also don't think I checked the fuse either. I'm going to pick it up from Storage after work today and do some troubleshooting.
|
|
|
08-23-2020, 12:29 PM
|
#18
|
Full Time Camper
Join Date: May 2012
Location: N.C. Mountains
Posts: 2,417
|
Check the connections. Could have hit the wire While replacing the fabric and it’s not getting a good contact.
__________________
*2016 CAF25SE Cruiser Aire 5er. *2020 Chevrolet 2500 HD Custom
*Ted & Tricia (Mimi - Teacup Poodle/ Sailor - Maltipoo)
*I have tried to live my life so that my family would love me and my friends would respect me. The others can do whatever the Hell they please!” —John Wayne
|
|
|
08-23-2020, 02:33 PM
|
#19
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Will do thanks for the advice. I'll let you know what I find.
|
|
|
08-29-2020, 04:53 PM
|
#20
|
New Camper
Join Date: May 2020
Location: TX
Posts: 6
|
Domestic 9100
I've tested the Motor by connecting it straight to a car battery all I get is a click. Any Ideas ?
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|