Anyone familiar with the wiring for the LP gas detector? A friends is not getting power to the detector. Manual says it should be protected with a one amp fuse. All of the fuses in the panel are ok however they are all 15-20 amp. We're not sure if it is wired to one of those circuits. I'm wondering if it is wired direct with an inline fuse. We pulled the wires out of the wall as far as possible and found no fuse. The unit is in a MH.
My old trailer had a 3 amp fuse behind the detector. had to take out the bottom drawer to access it. Try unscrewing the detector from the wall and there will probably be a fuse there..
__________________
It was a rainy few days at Algonquin Prov park...tarps kept us dry.
Wayne --Belle River (Windsor), Ontario
2013 Sunset Trail Reserve 25RB..(just sold it)
2015 White Chev Silverado 2500HD 4x4 (6.0 l gasser)
2003 Mountain Star 890SBRX Truck Camper
My old trailer had a 3 amp fuse behind the detector. had to take out the bottom drawer to access it. Try unscrewing the detector from the wall and there will probably be a fuse there..
We did remove the detector, no fuse. It's been raining all day so we haven't been able to check for connections at the battery.
Linear Mode
