I purchased a 2011 Zinger ZT 190- RDS from a dealer that went out of business shortly after. I cannot find anything explaining how the plumbing and valves and hot water tank all work. Its been trial and error. My water works with city water but i tried to get hot water and the tank never filled. I switched a valve near the tank and it sounded like it was filling but was actually leaking inside my storage area. I may have damaged the system with winterizing.
Can anyone point me to a video of how these systems work? Not having a dealer makes owning your first RV tough.
Clueless
When you winterized your camper did you fill the water lines with pink stuff.??? If so you might have left the siphon hose ball valve in the open position...That would cause a leak once you introduce water into the system...The only other thing I think would cause a leak is the drain plug, but that should NOT leak inside the camper, or a hole in a water line...
__________________
Rosie & Tommy
Coatesville Pa.
2017 Ford F350 Lariat Power Stoke DW
2022 Alliance Avenue 32RLS
In God We Trust
A proud member of the one percent...Semper Fi
Thanks to mark5w and sleepyt. I did check the valves and fittings. they are all fine. I filled the tank with water and it started leaking from the bottom.. How hard is it to replace the tank? Can I just replace tank or do I need to replace the entire hot water heater system?