Reply
 
Thread Tools Search this Thread Display Modes
 
Old 07-22-2014, 10:33 AM   #1
New Camper
 
Join Date: Jul 2014
Location: IN
Posts: 1
Red face Slide out jammed

Our slide out on 30 ft Sunset Trail is jammed in the "IN" position. Son-in-law (or daughter) slid it in with a large hasset in the way. One side is all the way in while the other edge is about 3 inches extended because it hit the obstruction. It blew the fuse and neither the awning or slide would operate. Quick swapped another of the 30 amp fuses. Now the awning moves, but nothing on the slide. It is clearly jammed. Anyone had this this issue? I don't mean in-laws. He's a good kid. He and daughter were taking some time off after our first grandchild.

They have no idea they jammed it up. Just hoping it is a simple fix.
Avonron is offline   Reply With Quote
Old 07-22-2014, 06:18 PM   #2
Family Vacation Member
 
Triker's Avatar
 
Join Date: Feb 2011
Location: Albertville, AL
Posts: 101
Are you able to manually crank it out?
__________________

Jim & Linda with Candy Bar and Misty
'06 Chev 3500 DuraMax w/Banks
'10 Seville
'09 GL1800 Hannigan Trike
GSCM USN(Ret)
ALR,PGR,VFW 3788, AL460
Triker is offline   Reply With Quote
Old 07-22-2014, 11:09 PM   #3
Seasonal Camper
 
sking's Avatar
 
Join Date: Aug 2010
Location: San Antonio TX
Posts: 293
The bell stop probably pulled into the frame, if that's the case back off the set nut then get a big pipe wrench and turn the bell stop until it comes out of the frame. The bell stop is a gold looking bell that's threaded on the slide arms. Once out the slide will go out but need adjusting before closing, you'll also need to close the hole in the frame a little in order to prevent recurrence.
__________________
2013 Ram 2500 4x4 pulling a 2014 Zinger ZF31bh 5ver.
sking is offline   Reply With Quote
Old 07-23-2014, 08:00 AM   #4
Weekend Camper
 
egrum's Avatar
 
Join Date: May 2011
Location: Alberta
Posts: 55
I am not sure what a "Bell Stop" is, however the first piece of info needed is what type of slide mechanics is used.

Is it the one with the "worm" tracks on the top and bottom of the slide on both front and back ends? Or is it a cable system, or is it a "Scissor" jack system? or is it hydraulics?

We have the worm tracks and it is a pain in the (moderator edit), the slide half the time will not move without people, me and the boys pushing on the outside to get it in and the inside to get it out.

If anyone has any suggestions I all ears.

Thanks
egrum is offline   Reply With Quote
Old 07-23-2014, 03:52 PM   #5
Full Time Camper
 
Join Date: Apr 2011
Location: Pennsylvania
Posts: 2,398
Avonron & Egrum
If you both have the slide system that has the tracks on the top & bottom of the side panels of your slide you have the Schwintek system. If that is the case you can google "Schwintek in-wall Slide System" and get a couple of tutorials on how to deal with minor issues with the slides.

Check EM OUT !!!!
__________________
Rosie & Tommy
Coatesville Pa.
2017 Ford F350 Lariat Power Stoke DW
2013 Cruiser Patriot 305 SKP

In God We Trust
A proud member of the one percent...Semper Fi
sleepyT is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Crossroads RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 10:26 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×