Depends on how "small" and how much effort you want to put into it. Boat shops will sell fiberglas resin, hardner and color tint, but that will be a big expense with a lot of material left over. I recently had a chip in a fiberglas shower, so I used some epoxy glue to fill the hole, then after it had set up, I used white appliance touchup paint to cover over the amber color of the epoxy. If the chip is very shallow, then the touchup paint may be sufficient with several coats to get the depth.
All this assumes you are really talking about a chip and not a crack.
__________________
Larry Day
Texas Baptist Men-Retiree Builders member since '01
13 Silverado 3500HD D/A, 2wd CCSB srw, custom RKI bed
11 Cruiser CF32MK
https://www.picturetrail.com/dayle1
|