Hi just wondering if anyone knows the size of the waterlines in a 2016 Sunset Trail 25rb, they look smaller than 1/2" I was wanting to add shut off valves vs. the screw caps. Any recommendations would be appreciated.
Cut 1/4” off of the end. Use that to get the right size. I thought it would be 1/2 inch.
__________________
*2016 CAF25SE Cruiser Aire 5er. *2020 Chevrolet 2500 HD Custom
*Ted & Tricia (Mimi - Teacup Poodle/ Sailor - Maltipoo)
*I have tried to live my life so that my family would love me and my friends would respect me. The others can do whatever the Hell they please!” —John Wayne
I did it and its one of the most useful and "bang for the buck" mods you can do. I do think they are 1/2".
It’s the little things that make us happy. If you haven’t added a battery shut off switch do that to.
__________________
*2016 CAF25SE Cruiser Aire 5er. *2020 Chevrolet 2500 HD Custom
*Ted & Tricia (Mimi - Teacup Poodle/ Sailor - Maltipoo)
*I have tried to live my life so that my family would love me and my friends would respect me. The others can do whatever the Hell they please!” —John Wayne
Just a word of caution! On some CR models they ran the fresh water tank vent out the bottom also (usually connected to the small screen opening next to the fill opening), if so & you add a valve to the vent be sure to open that valve when filling or you could rupture the tank.
Thanks all for the advice.
Yup, the battery disconnect has been installed, big difference.
I also don't know where the fresh water tank vent is, there is only the drain and the hot/cold low points coming out the underbelly. I do notice when I fill the fresh water, the tank burps quite a bit back at me.