|
2015 Franklin main slide
Just thought I'd throw one your way folks. I did my slides in and out after parked s few months. The main slides would not move out. Noticed there seemed to be no pump sound at all on out but in there was and both front slides had that so called grunt as in the out or all in stage.
So, I pulled the closet at door due to the wires wasn't supported to pull switch panel. Found the top wires to switch OFF. Not hooked up but they fit loose. Used the pliers to tighten spades and then pulled some if that slack up and tied zip ties to a anchor so the next time the panel can just be removed.
Hope there's something to help someone if you just notice the sound isn't right before going to manual mode
|
Linear Mode
