Fire place

[gdawgs24]

Does anyones fire place put out heat? If so what setting do I need it on

[cw3jason]

yes hit the thermometer button and keep pressing it until the desired temp is reached. I have mine set on 70

[harley]

you may have to hold the button for a few secs to get it to start moving.

[gdawgs24]

mine doesn't have where you can set a temp. you just turn it on low, medium or high. I have only had it on once and it didn't seem to put out any heat

[mark5w]

Can you open up the fireplace at the top front for a control panel?? My fp has a thermostat in there that you can control the temp.

[socoguy]

X2 Mine has a roller dial thermostat and a dial for flame brightness.

[Tim D]

Mine is thermostatically controlled as well. Push and hold button till it blinks, then push and release and repeat till desired temp is reached.

[RJHewitt]

We use the remote to turn the fireplace on and then it has two settings. You will see a single red light or a double red light to determine the heat setting. The fan speed seems constant. We have not found a way to adjust either on the fireplace itself. If someone knows more about this unit, I'd love the info.

[camperjim]

maybe your fire place is broke we used ours 4 times and it quit putting out heat took it back to dealer they ended up putting a new one in Jim&Carol

[TDG]

RJ the lights are behind the grate which is a door
Grab the vent on the right of the lights it opens
Hinge is on the left of the lights
You will find a on off switch. Heat switch and a dial from 0-9
Guess its the thermostat