Thread Tools Search this Thread Display Modes
Old 08-03-2012, 05:10 PM   #1
New Camper
Join Date: Aug 2012
Location: SD
Posts: 5
Just bought a 2012 Cruiser Aire CTL27RB. I have 3 issues so far:
1. The San-T Flush hookup to the black waste tank doesn't work. Water won't enter the black tank for some reason.
2. The stitching on the couch (both arm pads and back cushion) is very poor and is tearing. In fact the seam on the right arm pad has a 12" tear just above the Velcro.The couch pulls out into a bed.
3. The outside outlet states that it is gfi protected but it doesn't work. Neither does the tv outlet on the ceiling. Both outlets worked last time we camped. I assume they're on the same circuit. I've checked the breakers and fuses on the panel but I see nothing tripped or blown. Not sure where the gfi is located that protects that outside outlet.

Will be getting the couch replaced under warranty, but wondered if anyone has an idea on how to fix the flush and the outlets.

Cruiserbrad is offline   Reply With Quote
Old 08-04-2012, 12:08 AM   #2
Full Time Camper
fhenn's Avatar
Join Date: Jul 2006
Location: Ms
Posts: 2,739
Sounds like a gfi blown. They would more than likely be in the kitchen and or the bathroom

Frank and Janet Henn
2017 380MBH pushing a 2007 Dodge
CDT with a six speed Automatic
Traveling with Hoover and Rainbow the wonder dogs and now with Sunshine the rescue Schnauzer.
fhenn is offline   Reply With Quote
Old 08-04-2012, 01:20 AM   #3
Full Time Camper
artgpo's Avatar
Join Date: Jul 2009
Location: Texas
Posts: 780
I have needed both San-T-Flushes replaced, one under the two year factory warranty the other under my Xtra Ride extended warranty. Two different repair places replaced with Tornado flushes.

Art and Karen
2013 Itasca Sunstar 35F, 2013 Ford C Max toad.
170 nights in 2013
132 in 2014
artgpo is offline   Reply With Quote
Old 08-04-2012, 07:28 AM   #4
Weekend Camper
Rooster's Avatar
Join Date: Sep 2011
Location: Texas
Posts: 21
You should find the GFCI outlet in the bathroom. Trip the circuit at the GFCI and reset it. If that doesn't restore outlet power your most likely culprit is the GFCI outlet itself. We had the very same issue with our last TT. These are typically very inexpensive devices from the factory. We purchased a really good one from lowes/Home Depot. Around $10-$15. Fortunately we've never had a problem with the tank flush. Can't offer any advice for that one.

Enjoy your TT.
2012 Ram Longhorn Limited 5.7Hemi
2012 ST30RE
Equal-I-Zer Hitch
DW ,Daughter
Millie & Scooter (man's best friends)

Rooster is offline   Reply With Quote
Old 08-04-2012, 08:41 AM   #5
Full Time Camper
Stan's Avatar
Join Date: Apr 2006
Location: Oak Harbor, WA
Posts: 1,994
The flush screen screws into the black tank (on mine it's on the opposite end of the tank from the drain valve) and gets clogged from TP sloshing around while driving. You have to drop part of the membrane and unscrew it from the tank (tanks empty!) and clean it. Mine has done this twice. Fortunately, I know where mine is and only have to remove a little of the membrane to access it (just enough for an arm or two to get at the darn thing).

Stan and Terri
Oak Harbor, WA
2008 Chevy 2500HD D/A
2007 Cruiser CF30SK
Glide Ride Pin Box
Reese 16K Slider
Stan is offline   Reply With Quote
Old 08-05-2012, 02:27 AM   #6
New Camper
Join Date: Aug 2012
Location: SD
Posts: 5
Thanks everyone! Found the gfci outlets in bath and bedroom and reset them so they all work. Will check out the San-T-Flush repair a bit later.
Cruiserbrad is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

This website is not affiliated with or endorsed by Crossroads RV or any of its affiliates. This is an independent, unofficial site.

All times are GMT -6. The time now is 06:32 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.