Darrell,</span>I agree with CWIT &
HAMOPS.</span>
Thanks to having Easy
Lube Axles I just spent a few days cleaning the grease out of all four brake
drums. All of the rear seals allowed grease to blow by into the electric brake
components. Clean up was a pain. When the Easy Lube Hub is filled with grease
and then spun at 65 MPH the centrifugal force has to be tremendous. I assume
this is why the manual suggests an inspection every year.</span>
Here is an article on
re-packing and the Lippert Manual:</span>
http://www.lippertcomponents.com/OwnersManuals/Trailer-Axle/8-30-10-TrailerAxle-Web.pdf</span>
http://www.rv-life-and-travel.com/wheel-bearings.html
If you
do take on this project, there have been some current posts concerning loose
suspension hardware and brake adjustment. </span>
</span>
(Thank
you Forum Members for your suggestions while I completed my bearing work)</span>
</span>
Kamper Dave</span></span>