|
05-01-2012, 10:41 PM
|
#1
|
Family Vacation Member
Join Date: Oct 2011
Location: Hollis, NH
Posts: 235
|
I have a 2011 Zinger ZT25SB with a cabinet for the TV above the dining table. The flat screen TV is wider than the opening in the cabinet and must be strapped down with a velcro strap for traveling. Has anyone modified this cabinet to either make it wider of build a frame to mount the TV while still allowing access to the rear when needed? I am ready to undertake this project and, if anyone has done it before, why re-invent the wheel? Pictures or plans would certainly make this an easier job.
|
|
|
05-02-2012, 12:57 AM
|
#3
|
Family Vacation Member
Join Date: Oct 2011
Location: Hollis, NH
Posts: 235
|
I have an articulating arm now but I don't dare rely on it with the weight of the TV while traveling. I believe the stress is too great on the wall mount.
|
|
|
05-02-2012, 03:00 AM
|
#4
|
Weekend Camper
Join Date: Feb 2012
Location: Daytona Beach
Posts: 48
|
How heavy is your TV? The mount I got holds up to 40lbs. The hardware that came with it included 5" sheet metal screws that were more than sufficient for it. I set one bracket over the sink where the label noted to install the TV mount. The other bracket I mounted outside next to the kitchen (to the rear of the rig where there was an aluminum stud).
|
|
|
05-02-2012, 04:32 AM
|
#5
|
Weekend Camper
Join Date: Feb 2012
Location: Daytona Beach
Posts: 48
|
Quote:
Originally Posted by Ridgerunner
How heavy is your TV? The mount I got holds up to 40lbs. The hardware that came with it included 5" sheet metal screws that were more than sufficient for it. I set one bracket over the sink where the label noted to install the TV mount. The other bracket I mounted outside next to the kitchen (to the rear of the rig where there was an aluminum stud).
|
BTW, even with this mount you'd need to use a strap to secure it whenever the rig is towed.
|
|
|
05-02-2012, 05:27 AM
|
#6
|
Family Vacation Member
Join Date: Oct 2011
Location: Hollis, NH
Posts: 235
|
Well, in my estimation, the weight of the TV multiplied by the leverage factor on that long arm reaching out from the wall, is too much stress on those 4 screws for my taste and I'm not willing to depend on that swivel arm and the mounting. If I'm right, I'll be safe. If I take the chance and am wrong, I think the result will be worse than building an enclosure. So, thanks for the advice but, I'm not willing to take the risk.
|
|
|
05-04-2012, 03:47 AM
|
#7
|
Full Time Camper
Join Date: Apr 2011
Location: Canton, OH
Posts: 937
|
We just mounted our TV on the wall with a flat bracket. This particular bracket enables me to remove TV from wall when traveling (TV just lifts off wall portion of bracket). Does your bracket have a "quick release" or anything?
I mounted bracket solidly...but prefer to stow TV since I can.
__________________
Eddy & Brenda
Canton, OH
2015 Silverado HD 6.0L
2014 Zinger 32QB
|
|
|
05-04-2012, 08:56 AM
|
#8
|
New Camper
Join Date: May 2012
Location: Iowa
Posts: 1
|
I just picked up our Zinger 29Bh and am going to be mounting tv's this weekend. But am wondering how long of mounting screws did everyone use when mounting brackets to the side walls where our mounting areas are? i don't want to use a screw that goes through the outside wall. It looks like the side walls look like they are an 1 1/2 thick.
|
|
|
05-04-2012, 12:41 PM
|
#9
|
Full Time Camper
Join Date: Nov 2011
Location: WI
Posts: 896
|
I used 1 inch lag bolts...cannot remember the size of them but probably 3/8's in diameter...use a small drill to start the hole, go in about 1/2" and then put the lag in with a wrench or a ratchet...don't overtighten...the 2 bolts will hold up to 30 lbs...my 19" weighed less than 10 lbs. Good luck,
Jim
__________________
Jim & Linda Tator
Watertown, WI
2013 Crusier CF34SS GMC 3500 8.1L Dually
154 nights in 2013 - 4,370 miles
178 nights in 2014 - 5,082 miles
365 nights in 2015 - 6,040 miles
|
|
|
05-05-2012, 08:47 AM
|
#10
|
Family Vacation Member
Join Date: Jun 2010
Location: VA
Posts: 144
|
Our Zinger originally came with a TV shelf back in the corner. Totally worthless.
I replaced it with a swivel mount so we can watch from the dinette or the sofa. Even though our TV is not that heavy, I take the two minutes to slide it off the rack and place it on the bed when travelling. Never had a problem. Better safe than sorry, I say.
__________________
2010 Zinger ZT19RD
2000 Dodge Ram 2500 Cummins 4X4
|
|
|
05-07-2012, 03:08 AM
|
#11
|
Full Time Camper
Join Date: Apr 2011
Location: Canton, OH
Posts: 937
|
Quote:
Originally Posted by gobowling
I just picked up our Zinger 29Bh and am going to be mounting tv's this weekend. But am wondering how long of mounting screws did everyone use when mounting brackets to the side walls where our mounting areas are? i don't want to use a screw that goes through the outside wall. It looks like the side walls look like they are an 1 1/2 thick.
|
Double-check that for sure! I used spacers as our screws that came with bracket (about 2 1/2" long) would have gone thru wall into bunk area. a 1-inch screw should be OK. I would have bought shorter ones if the spacers didn't work.
__________________
Eddy & Brenda
Canton, OH
2015 Silverado HD 6.0L
2014 Zinger 32QB
|
|
|
05-07-2012, 05:03 AM
|
#12
|
Full Time Camper
Join Date: Nov 2011
Location: WI
Posts: 896
|
1 inch is fine as long as you use a wide thread...like on a lag bolt...a finer thread will pull out...trust me
Jim
__________________
Jim & Linda Tator
Watertown, WI
2013 Crusier CF34SS GMC 3500 8.1L Dually
154 nights in 2013 - 4,370 miles
178 nights in 2014 - 5,082 miles
365 nights in 2015 - 6,040 miles
|
|
|
05-08-2012, 03:29 AM
|
#13
|
Full Time Camper
Join Date: Apr 2011
Location: Canton, OH
Posts: 937
|
Quote:
Originally Posted by tator447
1 inch is fine as long as you use a wide thread...like on a lag bolt...a finer thread will pull out...trust me
Jim
|
Yeah...ours were lag bolts, too. I can only speculate how you learned that lesson...
__________________
Eddy & Brenda
Canton, OH
2015 Silverado HD 6.0L
2014 Zinger 32QB
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|