Two ways to repair;; remove the side molding, remove the rubber end tacks, roll-up the top , take off the lifted tacks holding the aluminium foil , replace the tacks with short screws. roll-down the rubber, tack or better use short screws to hold down the rubber end on the side, put new grey putty, cover with molding and screw it down.
Theeasy way ;; cut the top with an exacto at each lifted tack, through the cut pull the lifted tack, replace with a short screw, clean the slit sides and seal with dicor of which you canput a dab throiugh the slit. I will use the easy way when the first tack decides to pierce the rubber.
__________________
2006 cruiser cf30sk
|