On the slide side, I put the glue 1" deep on the edge and used a few door shims to wedge it tightly between the top of the slide crown molding and the glued panel edge (slide must be in to do this). The white Gorilla glue tends to swell a bit as it drys, so I had a damp cloth handy to smooth out the glue that seeped out. Once dried, the while Gorrilla glue looks just like thewhite latexcaulk the factory uses, but holds ten times better.
On the opposite side, I cut a scrap 2x4 a little longer than the ceiling height and used it brace the glued panel to the ceiling as it dried.
Hope this helps..........DV
__________________
DV
South Carolina
2011 Slingshot 29BH
|