Awning and slide don't work

[CSKingdonSr]

Put the awning out two days ago. I went to bring it in and it does not move. Flipped switch to both in and out, not even a sound. Thought I would check slide for operation and it doesn't move either. I have checked the fuse for the slide and it is good. TT is Zinger 27RL.

[FireRob]

Are you plugged in to power, running off batteries only?

[CSKingdonSr]

I am plugged in to power.

[ewbldavis]

I would pull panel cover off and investigate. I assume awning switch and slide switch are in a common panel?

[Tim D]

I would check battery as well.

[mark5w]

I found that the connections behind the switches don't need much movement to disconnect. Pull the panel and reconnect the switches.

[markandkim]

Im sure you have found the problem by now. Well?

[cw3jason]

Slides, power awnings, power Jacks and power stabilizers all work off of the battery due to the high amp draw. Check your battery voltage and the self resetting thermal breakers bolted to the trailer frame near the battery or near the device.

[CSKingdonSr]

Everything is working now. Battery voltage is good. I will look into the thermal breakers over the holiday. Thanks everyone.