Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-18-2009, 04:14 AM   #1
mark1974
Weekend Camper
 
Join Date: Feb 2008
Location: Moab, Ut
Posts: 42
Default

Would anyone here have any information, links to small swamp coolers? I'm living in my trailer and want to install a swamp cooler to beat the HOT Moab, ut summer heat and cut my costs over the A/C unit. The smallest downdraft I have found so far is 3k CFM and that's more then I need but the duct would fit perfectly over my roof vent where I would like to install one. I would remove the lid and the screen and it would be a perfect over the upper lip at 13-5/8". place a small wood surrund spacer under it and some plumbers tape straps up inside would be ideal. Anyone else done anything like this? Yes its freezing weather right now but I want to get the research done so I'm ready to go and time does fly. My calculations say I need only about 620 CFM. I wouldn't mind something at about 1k.

Thanks,
Mark
mark1974 is offline   Reply With Quote
Old 01-18-2009, 05:43 AM   #2
Dayle1
Full Time Camper
 
Join Date: Oct 2004
Location: Texas
Posts: 872
Default

Do a search for "RV evaporative cooler", TurboKool makes one that mounts in the std. 14"x14" vent opening, it is 750 cfm, 12VDC and costs between $500 and $600. There are probably some others as well. Also search for "portable", "personal" and "window" evaporative coolers. They will cost less and have cfm's in the range you want, but mounting them will be more difficult.
__________________
Larry Day

Texas Baptist Men-Retiree Builders member since '01
13 Silverado 3500HD D/A, 2wd CCSB srw, custom RKI bed
11 Cruiser CF32MK
http://pic80.picturetrail.com/VOL797.../395944616.jpg
Dayle1 is offline   Reply With Quote
Old 01-18-2009, 10:25 AM   #3
mark1974
Weekend Camper
 
Join Date: Feb 2008
Location: Moab, Ut
Posts: 42
Default

I have seen those before but had forgotten about it. I read on some other site of a guy who used one and it was marginal and would not always keep his entire unit cool (37 foot, no slides). They are also cost prohibitive for me so in all I have seen so far I'm thinking I will probably just stick with a good old traditional home style roof mount. I would rather overkill at 3k CFM that can be controlled with windows and a t-stat then to be too hot. 1/3 HP motors don't use that much power either, especially on low. Thanks for the reply.

mark1974 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Powered by vBadvanced CMPS v3.2.3

All times are GMT -6. The time now is 08:06 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2014, vBulletin Solutions, Inc.