Landing Gear Jacks

jaallen1 · 10-24-2009, 10:47 AM

The landing gear jacks on a 08 Kingston 33Sk, do the need lub?

Stan · 10-24-2009, 11:25 AM

I have never lubed mine, not sure where you would except maybe on the inner jack leg. I have also never read anything about lubing them.

jaallen1 · 10-25-2009, 11:23 AM

Stan, thanks that is what I thought.

Cajun TBoy · 10-26-2009, 01:26 PM

There are grease zerts on the top of the tube facing towards the rear one on each tube.

Stan · 10-26-2009, 03:46 PM

Now THAT is interesting. I will look for mine tomorrow. I wonder why that is not mentioned anywhere. Thanks Brent

Hunter11 · 10-26-2009, 09:31 PM

If you look at the top of the jacks inside the front storage area you will see a plate you can remove at the top of each jack. That exposes the gears and you can put some grease on them and then run them up and down a few times. then put the cover back on and you are good to go.

jaallen1 · 10-26-2009, 11:06 PM

Very good information, I will look for the greasezerts, if I don't have them I will remove the plate on top of the jacks and add some grease.

You may also like: