Well I just can't leave well enough alone I guess LOL Our 2012 CT29RLX Cruiser came with Electric Stabilizer on front & back and they are the slowest darn things that I ever saw . You have
to stand there holding the switch forever ! I took off the 12 DC.motors and have been using my
19 v dc drill to run them up and down but that meant having to carry a charger and heavy drill . What I have Now done is install 110 v ac receptacles in the front pass through on each side and one on the driver side near the back corner so I can just plug the AC 1/2 dill and run them up &down realquick thereare 110 plug in's on each side of the bed right over the pass through so I was able to feed the wire down through the wall and install receptacles.
These new battery drills are amazing. I just bought a 18 volt impact drill for emergency tire changes and during my test that beast took the lugs off my Dodge easily.
Now my new project list just got longer.......LOL
Your welcome Michael LOL For some reasonour Cruiseronly came with one 110 AC on the outside by the door and I needed it on the other side and dragging an extension cord under and around Hmmm ? NOT !!! I bought a very cheap /light weight 1/2 drill at Harbor Freight so as not to carry my good stuff in-case I forget and leave it someplace .LOL
yea Ruck what I started thinking of this was for the battery charger for the 19 VDC drill so I could run the Stabilizers with that but after thinking about how heavy the drill & charger were I just went one step further i Guess .