Trimetric Install With an Enclosed Underbelly?

[CanuckCamper]

I have a ST26BH that I'm considering putting a Trimetric meter in.

http://www.bogartengineering.com/products/TriMetric

I'm not sure how to wire it back from the shunt to the monitor with an enclosed underbelly (hoping to put the monitor in a similar location to my other "monitors").

Any advice from those that have installed something similar is welcome. Thoughts in general on if the underbelly is removable welcome as well.

Thanks in advance.
CC

[Murphie]

On another forum I noticed a guy ran conduit along the the frame rail and installed the shunt in a plastic JB that the conduit joined up to. It looked very good. Do a search on the Jayco forum, he's posted some great pictures.

[harley]

underbelly is just screwed to the frame every foot ish. just unscrew a few and you can pull it down enought to run wires ....thats were all wires are anyways. while you have it partially down , you can check for wires that need tying up or kinked hoses,etc.

[avvidclif]

I'm guessing you are monitoring the battery?

Might I suggest you look on Ebay. Look at # 171357586309 While that one does not have a remote shunt there are others that do. I didn't dig thru the hundreds of listings. Could save a buck or 2.