Yes, agree, do a search on youtube and bet you'll find a bunch of them,
also -->
http://www.crossroadsowners.com/foru...splay.php?f=13
quick info--> I use my water pressure regulator inline with an adapter from Amazon to connect my air compressor to it...
first
open the low point drains, take out the water heater anode, and open all faucets to drain all the water gravity feed...
then close all faucets, use the bypass water heater switch, and turn on the compressor to no more than 45 to 60 psi...
go around and open each faucet to blow out the remaining water... do all outlets one at a time, including outside showers, W/D connections, etc...
good luck but you may be too late depending on where you are