|
10-22-2012, 03:02 AM
|
#1
|
Weekend Camper
Join Date: May 2008
Location: Manch Vegas NH
Posts: 91
|
hey all i'm looking for the water pump in my Zinger 30BH, I would like to add the auto winter feed when winterizing & I have no idea where it is, any help appreciated. thanks
__________________
Jay & Kim
Bear & Chewy (rest in piece puggs) & Rescued Mason - pug
Ava Michelle - designated kid
11 Ram 2500 - Green Machine - retired
16 Chevy 2500 - Bone Crusher - the dark side
08 CR Zinger 30BH - Zing 1
|
|
|
10-22-2012, 03:26 AM
|
#2
|
Weekend Camper
Join Date: Mar 2012
Location:
Posts: 12
|
I believe the water pump is located in the kitchen base cabinet below the range.
__________________
Trailer Tom
|
|
|
10-22-2012, 03:31 AM
|
#3
|
Weekend Camper
Join Date: Aug 2012
Location: New Hampshire
Posts: 12
|
Turn the pump on and open a faucet you'll be able to hear the pump. Just follow the sound to get a general idea of its location.
|
|
|
10-22-2012, 04:07 AM
|
#4
|
Weekend Camper
Join Date: May 2008
Location: Manch Vegas NH
Posts: 91
|
yeah I have tried that just can't see it - i wanted to install the quick winterization kit for pumping rv antif. into the unit for winter but it's not visable - I guess it could be under the stove behind the fake wall board?
__________________
Jay & Kim
Bear & Chewy (rest in piece puggs) & Rescued Mason - pug
Ava Michelle - designated kid
11 Ram 2500 - Green Machine - retired
16 Chevy 2500 - Bone Crusher - the dark side
08 CR Zinger 30BH - Zing 1
|
|
|
10-22-2012, 05:14 AM
|
#5
|
Full Time Camper
Join Date: Oct 2004
Location: Texas
Posts: 1,508
|
Quote:
Originally Posted by Vader
yeah I have tried that just can't see it - i wanted to install the quick winterization kit for pumping rv antif. into the unit for winter but it's not visable - I guess it could be under the stove behind the fake wall board?
|
Absolutely, there should be a couple of screws holding the fake board in place. In fact if you look closely at the underside of the stove, that panel will not touch the bottom of the stove and you will likely see the water lines for the pump. Remove the panel and find the fill tube for the anti-freeze.
__________________
Larry Day
Texas Baptist Men-Retiree Builders member since '01
13 Silverado 3500HD D/A, 2wd CCSB srw, custom RKI bed
11 Cruiser CF32MK
https://www.picturetrail.com/dayle1
|
|
|
11-15-2012, 12:56 PM
|
#6
|
New Camper
Join Date: Apr 2012
Location:
Posts: 4
|
Just turn it on and listen for t he noise..you will be able to locate it easily
|
|
|
01-04-2014, 03:39 PM
|
#7
|
New Camper
Join Date: Jan 2014
Location: Georgia
Posts: 3
|
Same problem on a Sunset Trail 31, can't find it and it is not making a noise. It was fine and I have a really cold weather system moving in and was going to put in antifreeze even though it is enclosed.
|
|
|
01-04-2014, 03:50 PM
|
#8
|
Full Time Camper
Join Date: Feb 2013
Location: VA
Posts: 590
|
Look for your fuse panel and make sure the fuse is not blown. It should be somewhere between the outside fresh water tank and the kitchen sink or at least this is what I have been familiar with. Please post the model so someone with the same can help more.
__________________
Larry & Jean - Chesterfield, VA
2014 Ram 3500 4x4 dually crew cab - Black
2010 Montana 3665RE - New to us
2013 Zinger 30KB - Sold
CrossroadsRV Rally 2013 & 2014 - Northeast Crossroads Rally 2014 - Mason-Dixon Rally 2014
|
|
|
01-04-2014, 04:24 PM
|
#9
|
Full Time Camper
Join Date: Dec 2007
Location: Breckenridge,CO
Posts: 975
|
Don't know if the floorplan's the same on your '08 Zinger 30 BH but my '08 ST30BH pump is behind a panel under the bathroom sink.
__________________
CAMPGROUND "DRIVEWAY"
Breckenridge, CO
'08 Crossroads Sunset Trail ST30BH Traded
'21 Grand Design Reflection 31MB 5er
'22 Cougar 29RLI 5er
'23 RAM 2500 4X4 CTD
|
|
|
01-04-2014, 06:54 PM
|
#10
|
Full Time Camper
Join Date: Jan 2011
Location: Mebane, NC
Posts: 2,394
|
look on the outside of your trailer for your hot water access panel. Note the location and then go inside. You should find a panel low to the ground with screws in it. open it up, in there should be your hot water heater and your water pump. Also, are you hooked to city water? If so unhook from that and make sure your water pump is turned off, then turn on spicket and let it run.
__________________
2014 Chevy Silverado 3500 SRW Duramax
2011 Zinger ZT26BL-sold
2014 Sabre 34REQS
***Member of the Mason-Dixon Group***
|
|
|
01-08-2014, 05:22 PM
|
#11
|
Full Time Camper
Join Date: Apr 2011
Location: Canton, OH
Posts: 937
|
Vader,
Mine was behind plywood under stove. I took out plywood for easy pump/tube access. Could be by water heater, also
If you can reach over plywood under stove, you may feel around and find pump.
__________________
Eddy & Brenda
Canton, OH
2015 Silverado HD 6.0L
2014 Zinger 32QB
|
|
|
04-09-2014, 09:12 PM
|
#12
|
Weekend Camper
Join Date: Apr 2014
Location: Utah
Posts: 25
|
I'm having the same issue with my brand new ZT218TD. Foamy water sputtering out, mostly air. I'm pretty sure the winterizing valve is open but darned if I can figure out where it is. Any ideas?
|
|
|
04-09-2014, 09:46 PM
|
#13
|
Full Time Camper
Join Date: Jan 2011
Location: Mebane, NC
Posts: 2,394
|
Quote:
Originally Posted by anaro
look on the outside of your trailer for your hot water access panel. Note the location and then go inside. You should find a panel low to the ground with screws in it. open it up, in there should be your hot water heater and your water pump. Also, are you hooked to city water? If so unhook from that and make sure your water pump is turned off, then turn on spicket and let it run.
|
Kvmllr-- follow this, it should find the heater and water pump... mine sit right next to each other. The valves are in the lines right at the water heater.
__________________
2014 Chevy Silverado 3500 SRW Duramax
2011 Zinger ZT26BL-sold
2014 Sabre 34REQS
***Member of the Mason-Dixon Group***
|
|
|
04-10-2014, 09:34 PM
|
#14
|
Weekend Camper
Join Date: Apr 2014
Location: Utah
Posts: 25
|
Found it. Behind a screwed in panel beneath the oven. Next task will be to better soundproof that area and install some sort of quick-release holders for the panel.
|
|
|
10-30-2015, 10:16 AM
|
#15
|
New Camper
Join Date: Jul 2015
Location: NJ
Posts: 2
|
2015 Zinger 33bh hot water location
Late to the game, but worth adding. The location for both the water pump and the water heater is the same in this case - lift the queen bed in the front room and look down and left, as you face the front. Here, you will see both parts.
|
|
|
10-31-2015, 09:59 AM
|
#16
|
Weekend Camper
Join Date: Apr 2014
Location: Utah
Posts: 25
|
pump location
it's not under the bed in my TD218. It's behind a screw-in panel beneath the oven. It's great space; just odd that's it's not more easily accessible. that will be fixed with a couple of lay-flat rings on the outside and metal pop-in holders on the inside. Hopefully before spring camping.
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|