We have a 2007 Cruiser CF29CK that we just purchased. During our first camping trip another cruiser owner stopped to talk to us and asked if we had noticed our bedroom slide dropping down. He has a 2008 and noticed that when closed the decals did not line up like the other two slides and water is intruding. When we closed our camper up, we too noticed our bedroom slide seemed to have dropped. Decals are way out of alignment. Has anyone out there noticed this or do you know the fix for the problem???New to 5th wheels so we need all of the help and info we can get. Thanks in advance for your expertise!!!
Sounds like you may have to take it back to the dealer to have the slide aligned. I know there have been a few people that have done their own butI am not one of them.
__________________
17 Chevy 3500 DRW 4X4
16 Mobile Suites 36RSSB4
2 Mini Dachshunds
We just had ours done.Noticed like yous the slide was sagging when open. Turned out to be lose bolts on the roller bracket on left side, as a matter of fact two bolts were missing altogether, making the roller do funky things! It also tore up the bottom seal, all replaced under warranty.
We have a new 2008 purchased last year and had the same thing happen. The fix is super simple. I had a friend of mine inside the trailer lift up the roller brackets and tighten up the loose bolts on the roller brackets located under the bed against the wall while I lifted up on the slide outside the trailer. (of course the slide was extended)
Noticed like yous the slide was sagging when open. 
Turned out to be lose bolts on the roller bracket on left side, 
as a matter of fact two bolts were missing altogether,
making the roller do funky things!
It also tore up the bottom seal, 
all replaced under warranty.
Linear Mode
