Wall-Floor separation - Page 2

tator447 · 10-15-2012, 03:00 AM

Oldcow,
I would say it is safe to assume that, yes. I may have spoken a bit to soon, I will find out on Thursday when I go to the rally at Comlara. My son was visiting from MI and I took him out to see my unit. I have the battery disconnected so I back the TV up and connected the power so I could put the stabilizers down and put the slides out. The slide in the bedroom started to go out but it was quickly evident that it went a little sideways so I stopped. I don't know if there wasn't enough power or if that was the problem. I'll find out when I get connected to shore power and try it then. If it doesn't, well I am in hopes I will have plenty of "old hands" that can help me solve the problem. If I do indeed have a problem well, after the campout next weekend I am taking it to my dealer for winterizing and an inspection. If there are problems I will just leave it there until it is fixed. That's about all I can do...but I'm sure glad I have a 2 year warranty at this point. Time will tell.

Jim

Hunter11 · 10-15-2012, 05:02 AM

Jim, you sure you wouldn't rather have that 1 + a Promise????

**Lloyd** · 10-15-2012, 05:37 AM

Is that the same as-------the checks in the mail?????

mwebber78 · 10-15-2012, 09:14 AM

With the new 12-point promise you should be back on the road by 2013, just in time for your warranty to expire.

denism28 · 10-22-2012, 06:12 AM

I have a CR Cruiser cf30sk 2006 . Exactly as described the wall is butt jionted to the plywood floor .I added srews butt to no avail. I will put an alumangle on the inside under the carpet an against the wall with screws in the plywood floor and in the 1.5 x1.5 aluminium tube in the bottom of the extension wall then paint the visible part of the alumangle to amouflage it.
Added to that, the alumminium sheet that rounds the ceiling and the exterior wall is fixed with metal staples which are useless in 3/8 plywood.so the alu makes two ridges on each side of the EPDM top. Hours of fun to repair but i keep this as it is . As for the quality control, WE are the ones who do it, so during the guarantee period,check everything to have itrepaired.

You may also like: