water pump

[ajay]

Hi
I have a 2015 27ft cruiser aire 5th wheel.
could anybody tell me where I could find the water pump
in that trailer. I think there's either a kink or something is wrong
with the pump. Turn tape on, pressure is good then goes down to a trickle
doesn't matter what tape they all do the same. City water pressure is find.
Do dry camping mostly, so got to check that pump.

[campingcpl]

On our Cruiser it's in the basement storage area behind a false wall.

[ajay]

wish I had a basement storage area

[Lloyd]

Mine is in the rear under the sink with the water heater.
I would think you should be able to hear it when it's running, and track it down that way.

[ajay]

mine is at the rear also, sounds like it's in the end table between the
2 recliners, living area is at the back, kitchen in center and washroom closer to the front.

[ajay]

Thanks, I found the pump in the end table, took the front panel off and and there was 2 line that was almost bent in half, why that left the factory like that is beyond me, anyways I cut them back put everything back together, now I have good pressure.

[Papa-T]

Originally Posted by campingcpl

On our Cruiser it's in the basement storage area behind a false wall.

Same here on drivers side

[Papa-T]

Sounds like you might have the winterizing valve open on the antifreeze line at water pump.

[ajay]

PaPa-T thanks anyways but like I said I fixed the problem

[Lloyd]

Originally Posted by ajay

Thanks, I found the pump in the end table, took the front panel off and and there was 2 line that was almost bent in half, why that left the factory like that is beyond me, anyways I cut them back put everything back together, now I have good pressure.

Originally Posted by Papa-T

Sounds like you might have the winterizing valve open on the antifreeze line at water pump.

Papa-T, he stated he had good pressure. So it it must be fixed.

[harley]

Originally Posted by ajay

Thanks, I found the pump in the end table, took the front panel off and and there was 2 line that was almost bent in half, why that left the factory like that is beyond me, anyways I cut them back put everything back together, now I have good pressure.

Mine had a kink (right from the factory) in the hose at the water tank. also at the tank end of the black tank flush...both fixed now.