|
06-15-2011, 09:43 PM
|
#1
|
Weekend Camper
Join Date: May 2011
Location: Rising Sun, Md
Posts: 36
|
Does anyone know what size tube I will need for anElectric Power Tongue Jack for my newly ordered ZT26BH TT ? 2" or 2 1/4"
__________________
2012 Zinger ZT26BH
2005 Dodge RAM 3500, CTD,QC, 4x4,SRW,48RE,3.73
Honda EU6500is
Mini Dachshund
|
|
|
06-16-2011, 07:35 AM
|
#2
|
Weekend Camper
Join Date: May 2011
Location: Rising Sun, Md
Posts: 36
|
I'm not sure which size to get....
__________________
2012 Zinger ZT26BH
2005 Dodge RAM 3500, CTD,QC, 4x4,SRW,48RE,3.73
Honda EU6500is
Mini Dachshund
|
|
|
06-16-2011, 10:32 AM
|
#3
|
Full Time Camper
Join Date: Nov 2006
Location: Bradley, Il
Posts: 1,018
|
Don't know what you mean by tube size. The electric tongue jacks are a complete bolt-on assembly. Most are rated around 3,000 pounds. The only one I am familiar with is the Atwood model. Had one on a Dutchman and a Sprinter TT. Worked great.
__________________
Dale & Carol
Bradley, Il
2007 F-250
2010 CF30SK Patriot
2007 CF30SK
|
|
|
06-16-2011, 10:40 AM
|
#4
|
Weekend Camper
Join Date: May 2011
Location: Rising Sun, Md
Posts: 36
|
I am shopping for a Barker, but they come in two sizes. 2"and 2 1/4" Its the size of the hole in the "A" frame the jack installs down through. I would like to get the 3500lbs 24" long jack, but it only comes in 2 1/4" I need to know the hole size on the tongue of the TT.
__________________
2012 Zinger ZT26BH
2005 Dodge RAM 3500, CTD,QC, 4x4,SRW,48RE,3.73
Honda EU6500is
Mini Dachshund
|
|
|
06-17-2011, 08:57 AM
|
#5
|
Full Time Camper
Join Date: Nov 2006
Location: Bradley, Il
Posts: 1,018
|
If the 2" Barker is rated at 3,000 lbs, it would have plenty of power for your TT.
__________________
Dale & Carol
Bradley, Il
2007 F-250
2010 CF30SK Patriot
2007 CF30SK
|
|
|
06-17-2011, 03:50 PM
|
#6
|
Seasonal Camper
Join Date: Jul 2009
Location: Fort Gratiot MI
Posts: 450
|
bigdave,
I replaced my tongue jack with a Barker. I went with the 2" dia. tube. I could have went with the 2 1/4" tube no problem, the hole was plenty large enough. Im assuming that CR uses the same type tongues on every trailer, it wouldnt make sense to have different sizes in the factory using common sense, plus it would make for a confusing assembly line IMO.
If it were me and I wanted the 2 1/4" I would get it because CR isnt going to use two different sized holes for their tongues. Just my opinion.
__________________
Brian, Tamara, Abigail
2003 Lincoln Navigator Ultimate Edition 4X4
2004 Crossroads Cruiser CT30RL
|
|
|
06-17-2011, 10:06 PM
|
#7
|
Weekend Camper
Join Date: May 2011
Location: Rising Sun, Md
Posts: 36
|
Thank you fixit, that is what I needed to know, the size of the hole. I was hoping to go with the Barker with the longer shaft / lift. 24"versus 18". Barker only has one 24" jack and it only comes in 2 1/4" hole size. With the 24" jack, I may not need to have blocks of wood under the jack when I park the TT in my driveway, which has a slight downward slope.
__________________
2012 Zinger ZT26BH
2005 Dodge RAM 3500, CTD,QC, 4x4,SRW,48RE,3.73
Honda EU6500is
Mini Dachshund
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|