|
08-17-2012, 07:35 AM
|
#1
|
Weekend Camper
Join Date: Jul 2012
Location: PA
Posts: 35
|
I have a 2012 30re and the tables wobbles. To the point where it is impossible to eat at the table unless you are very careful not to push down on the table.
Does anyone else have this issue my dealer says all the units he has have the same characteristics.
|
|
|
08-17-2012, 01:01 PM
|
#2
|
Full Time Camper
Join Date: Nov 2011
Location: WI
Posts: 896
|
I have a free-standing table and chairs and mine does not move, or wobble at all. The table is bolted to the floor so it should not wobble at all. I'm sure you've checked the bolts or your dealer did, but seems to me your dealer telling you 'they are all like that' does not cut it. I haven't heard from anyone else having this problem. Let's see what your posting brings.
Jim
__________________
Jim & Linda Tator
Watertown, WI
2013 Crusier CF34SS GMC 3500 8.1L Dually
154 nights in 2013 - 4,370 miles
178 nights in 2014 - 5,082 miles
365 nights in 2015 - 6,040 miles
|
|
|
08-17-2012, 02:31 PM
|
#3
|
Family Vacation Member
Join Date: Feb 2012
Location: Oklahoma
Posts: 131
|
Quote:
Originally Posted by Djkell001
I have a 2012 30re and the tables wobbles. To the point where it is impossible to eat at the table unless you are very careful not to push down on the table.
Does anyone else have this issue my dealer says all the units he has have the same characteristics.
|
No mine is stable, no problem with it.
Paul
|
|
|
08-17-2012, 03:32 PM
|
#4
|
Weekend Camper
Join Date: Jun 2011
Location:
Posts: 31
|
Is your table the one that is attached to the wall with a slide down mechanism?
Mine is that type and it does move slightly, but not to the point that we can't eat there.
It has a slight wiggle if you really lean on it.
__________________
Me & Hubby
3 Sons, 2 Daughters-in-Law
1 Daughter, 1 Son-in-Law
1 Grandson, 2 Grandaughters
2012 Sunset Trail 26BH
|
|
|
08-18-2012, 01:41 AM
|
#5
|
Full Time Camper
Join Date: Apr 2007
Location:
Posts: 679
|
if your table is the kind that has two metal poles that attach the table top to the floor you can try to cut a 1/4" off the pipe ends. they are tapered to fit into the holes in the table and floor. cutting a little off will make the metal post fit tighter. try tapping them in with a rubber mallet.
|
|
|
08-18-2012, 06:50 AM
|
#6
|
Weekend Camper
Join Date: Jul 2012
Location: PA
Posts: 35
|
Yes mine is the one that has a slide on the wall it is called a dream dinette. I located the factory and had my dealer call them. When I called them the factory said it was not installed correctly. They sent instructions to the dealer. I should not have to contact the factory the CrossRoads factory should of called them.
|
|
|
08-19-2012, 10:18 PM
|
#7
|
Weekend Camper
Join Date: Feb 2012
Location: Greenville, SC
Posts: 64
|
Actually, your dealer should have figured it out and not made it your problem. Sounds like they just blew you off.
|
|
|
08-27-2012, 07:59 AM
|
#8
|
Weekend Camper
Join Date: Feb 2012
Location: Utah
Posts: 57
|
I have the same type of dinette table, attached to the wall with a slide down mechanism and then one fold out table leg, it does move and if you lean on the table, it tends to lean down but if you are somewhat careful, it's fine to eat on. I just wish it was sturdier, I end up adjusting it a few times each trip to keep it level, bugs me to see it unlevel, sort of like having a crooked picture on the wall.
|
|
|
08-28-2012, 11:39 PM
|
#9
|
Weekend Camper
Join Date: Feb 2012
Location: Greenville, SC
Posts: 64
|
I had broken the leg off on my table a while back. Took it in to the dealer and they ended up ordering me a whole new table. I took my RV back home because it was going to take 6 weeks to get it in. So I get this call at the end of July that my table came in. So I asked them, can I just pick up the part and install it myself? Sure, no problem!
So last weekend I crawled under my table to look at how I was going to take it all apart and install this new one. To my surprise, they had glued the old leg using some kind of wood glue. Seems strong, I can operate the leg up and down OK and the table seems solid. So I guess I'll just keep using it and store the new one for the time being. Maybe I'll fabricate an outside use table from the new one I have in the box - it would be nice to have some table space at the outside kitchen.
|
|
|
05-21-2013, 10:03 AM
|
#10
|
Full Time Camper
Join Date: Aug 2012
Location: Belle River , Ontario
Posts: 1,753
|
I have the same Dream Dinette ion my 2013 25rb and one of the little white wheel broke and lost all ball bearings . looks like there was a screw to the wall not fully screwed in from day one .
How easy is it to take unit apart to replace the wheeel ? any one know?
__________________
It was a rainy few days at Algonquin Prov park...tarps kept us dry.
Wayne --Belle River (Windsor), Ontario
2013 Sunset Trail Reserve 25RB..(just sold it)
2015 White Chev Silverado 2500HD 4x4 (6.0 l gasser)
2003 Mountain Star 890SBRX Truck Camper
|
|
|
05-23-2013, 12:09 PM
|
#11
|
Weekend Camper
Join Date: Jul 2012
Location: PA
Posts: 35
|
I had the problem when I had the camper back at the factory they replaced it. There was no way to fix it I called the Dream Table myself telling them I was totally not satirized with their table. My dealer could not get resolved that is why I called the factory myself .
|
|
|
05-23-2013, 12:15 PM
|
#12
|
Weekend Camper
Join Date: Jul 2012
Location: PA
Posts: 35
|
I had the problem the factory could not fix . I requested that it be replaced. Since it has been replaced no problem. The dealer could not get it fixed.
|
|
|
05-24-2013, 02:11 AM
|
#13
|
New Camper
Join Date: May 2013
Location:
Posts: 2
|
I have a 2012 29SS and we have the same table. If my memory servers there is a locking pin / rod under the table that prevents it from moving down when you lean on it. Once "unlocked" and with the correct amount of pressure the table will lower. At least this is how mine works.
__________________
2012 Sunset Trail Reserve 29SS
2010 F350 XLT Lariat CC FX4 6.4L diesel
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|