Bedroom Slideout 38' PP

[KECoats]

Have 2006 PP with a king bed in the slideout.



Whenit is closed for travel the slide raises itself the last couple of inches as it comes in and is even all the way accross the top seal as I look at it from the outside. After travelinga couple hours, the end of the slide toward the front of the 5th wheel has dropped 1 to 1-1/2 inches allowing rain to come in along the top seal on that end.



I could have swornat one time I lookedbehind the bottom seal of that slideout and saw a roller on both ends of the slide about a foot in from the edge. But now there is only a roller at the rear end of the slide, none at the front.



Took the bed apart and a couple friends looked at it with me. One of them said he didn't think there was ever a roller on the front end. In hisopinion the large angle irons of the slide mechanism were what held it level. So we loosened the 4 heavy bolts, (one was a little loose), jacked up theslide and retightened the bolts. That has helped some but doesn't seem right.



Do any of you know if there is supposed to be roller on each end of the slide?



Appreciate any info you can provide.