Have a 2011 305skp and lost drivers side fender skirt due to blow out, got new skirt but it needs cut because it extends past slide. Havent cut new one yet. Question is when the slide comes in is the cut part even. I think my slide may need to be adjusted because looks the slide out skirt is going to stick out past the cut part attached to the 5th wheel. If someone could post or email a pic of theirs would be great.
Hey, Thanks for the replies, I thought my old one did but wasn't sure. I had to put Black skirts on because, CR does not make white ones anymore, I also replaced all the rubber molding around the roof, down the back and under the front with black, came out looking pretty good. The white was all moldy and wouldn't clean up.
Spent the month of Sept in a RV park in Vermont. During that period 3 Cruiser 305 SKP models visited. We have a 2011 there was a 12, 13, and 14 model and the campground owner put each next to us during their visit. All had the cut fender flare skirt the floorplan remains the same. The 14 had full vinyl flooring in the living area. I would like that for ease of care as we travel with dogs
Al Laura (Lily & Breeze Portie Girls)
2011 F250 6.7 PS Tuxedo Black 4x4
11 305SKP- TPMS- RideRite air bags
Reese 16K Slider Wet Bolts
Holidays over, back to work on fiver, my fender skirt just doesnt seem to line up right. Havent cut new skirt yet. With the broken piece put back on it looks like it is behind the slideout, I dont remember it being that way. I know the two pieces dont line up together. Tried to find a dealer around here that has one to look at and none available.