Bedroom Slide Here is what it looks like

[geondebi]

I have seen this topic on the forum before and never could visualize what it was. I had to take the cover off today and thought I would share what it is and what you need to manual bring the slide in and out.

I am not sure if you need to pull the pin out so you can bypass the motor BUT it is a 5/8 inch and you can be sure I will have a socket ready to go if needed.

Here are some pictures of the slide hardware

http://picasaweb.google.com/geondebi/Fifthwheel#

[Hunter11]

And it is tight in there so be ready to spend some time cranking on it if need be. Good pics George.

[fhenn]

Looks like a ratching box wrench is called for

[Virginia RVers]

I did not have this type of motor on my slide. I had to replace my motor from Lippert with one to use the manual option.

I hope I don't need to use the manual on the other two slides on our PP.