Broken plastic L molding on slide, replacement parts?
My 2015 Crosscroads Cruiser has damaged plastic molding that covers the slides floor ends when extended. Trying to find replacements without success. Any suggestions? It’s black plastic L shaped about 1/2” x 2.5” x the length of the slide.
Not sure what about your "L Molding" but look up slide skis. They go on the bottom/side of the slide and run the length of the slide. That may be what you have.
__________________
2009 Seville VF32KS
2019 GMC Sierra 3500HD Crew Cab Denali.
6.6 Diesel standard box.
Thank you, I looked those up and the part I’m looking for is not functional it’s just exterior trim that caps the part of the slide floor that’s visible beneath the framing.
There is similar stuff available on Amazon but it’s all listed as interior grade and this is out in the weather.
Quote:
Originally Posted by dagst1
Not sure what about your "L Molding" but look up slide skis. They go on the bottom/side of the slide and run the length of the slide. That may be what you have.
Yes!! I believe this is what I’m looking for. I need to confirm my measurements as I thought it was more like 1/2” x 2 1/2 “ x ?? But this is the product I’m looking for.
I replaced all mine with thin stainless steel. Took a sheet, cut it as needed and formed it into the L shape.
__________________
Phoenixville, PA
2007 Ram 3500 Cummings Diesel (5.9L)
Had a Jayflight TT, then 2006 Crossroads PP PF35SL. Now in a 2011 Coleman Signature Series CTF 340 RL 5th wheel
Kendall at Nashville RV came through for me and I have three. I bought the tape they recommended for installing as well, it’s more like a flattened strip of putty. Very happy I can fix this.
The thin SS idea sounds smart, definitely an option for the future if I need to replace more.
Quote:
Originally Posted by KECoats
You trim it to the length you need.
I replaced all mine with thin stainless steel. Took a sheet, cut it as needed and formed it into the L shape.
Linear Mode
