Dinette booth removal

[sjk1998]

I know that there has been some discussions on removing the dinette booth and installing a free standing dinette table and chairs. Has anyone actually done this? If so could you post your experience and some photos please. I have a 2017 Sunset Trail 250RB and am thinking of doing this mod. Thank you.

[Lloyd]

Here is a post from Dayle1.


From my experience and knowledge, the wall panel will be completely finished inside the dinette bench. Generally, there will be 6-8 screws securing it to the floor and a few more securing it to the wall, so when you remove it, there will be some screw holes to patch and there may be some scratches to the paneling from when the bench was set in place.
_______________

[Papa-T]

Here is information from mountainmodernlife website that might help. https://mountainmodernlife.com/remov...dinette-booth/

[Mpowe042]

I have a 2014 Sunset Trail Reserve SF34RE14 that we purchased new. It came with a dinette table and 4 chairs. We had the booth installed and still have the table in storage. If you decide to do your modification, you might be interested. I could make you a good deal. Thank you.

[hollardawg45]

Be sure to check that there are no pipes or tanks under the benches. Otherwise its very easy.