hi having problems withe the large lounge slide on my 31bh 2012
rh side moves 2 inches then stops
it will go back in and out 2 inches
the left hand side wants to keep moving
has an enclosed underbelly and cant find where my manual crank connects
any ideas cheers
just a thought but it might help. depending on your slide system, just something that I did to my setup is I lubricated the slide rollers with a dry silicone spray lubricant, I did mine from the outside by holding back the rubber seal and sprayed the 4 rollers (each side top and bottom) as the Misses mover the slide in and out a bit. Our slide was starting to act up by acting and sounding jumpy and sometimmes needed just a gentle hand as it too was binding, I noticed when i drenched the rollersc with the lubricant lots of grime and dirt/dust washed out so i'll tell you it certainly didn't hurt them and helped a ton. It's one of those products that is now home in the trailer. i gotit a Canadian tire but there's lots of similar products, it's just silicone spray. https://www.canadiantire.ca/en/pdp/j...1551p.html#srp
You have a schwintec slide. Google how to sync motors, and trouble shoot problems.
__________________
It was a rainy few days at Algonquin Prov park...tarps kept us dry.
Wayne --Belle River (Windsor), Ontario
2013 Sunset Trail Reserve 25RB..(just sold it)
2015 White Chev Silverado 2500HD 4x4 (6.0 l gasser)
2003 Mountain Star 890SBRX Truck Camper