We have a 2010 CF30SK. The slide-out will not extend unless you monkey around with the toggle switch back and forth until it eventually catches and extends. Any ideas what the problem could be? No problem retracting though.
Just my opinion but it sounds like a gear problem. I would take it in before it breaks completely. On ours the switch sticks every now and then. Next time we are out I will remove it and spray some contact cleaner on it. Good luck.
2005 Cruiser 29CK
2008 GMC 2500hd 4x4
Crew cab Long bed 6.0 gas
4.10 gear ratio
Crawl under the slide and look at the drive gear...Look for broken or worn teeth on the drive gear or the teeth on the drive bar...Have someone extend and contract the slide as you are watching...If the teeth are worn it may pop until it hits a tooth that starts the slide moving...
Rosie & Tommy
2017 Ford F350 Lariat Power Stoke DW
2013 Cruiser Patriot 305 SKP
In God We Trust
A proud member of the one percent...Semper Fi
Do NOT continue holding the switch when moving the slide until you hear the ratcheting sound when the slide gets to the end of travel. As soon as it hits the stops, let go of the switch. The slide may also need some minor adjustments to the stops.
2016 Duramax - 2010 CF30SKP
Viet Nam Vet 70-71 Da Nang
Real airplanes have two wings and big, round, engines