My family and I recently purchaased a used 2009 Zinger 32 QB and at the time of purchase the TVmounting bracket on the"E Center" was missing. This is the TV bracket that mounts on the unit that has a mirror on one side and theTV mounts onthe other side. The unit flips around from the front bedroom to the living room. Could someone please send me a picture of the TVmount or give me a part number if possible? I would like to get the correct TV mount. Themounting screws for this mount must be kind of short due to having the mirror on the other side. Thanks for all your help.
I purchased an articulating arm for the my 20" LCD TV. The key here was to not use any mounting screws longer than 1 1/2 " long.When you predrill pilot holes for the screws make sure your drill bit does not go through the wood much more than 1 1/2 " as the mirror is on the other side.
Most audio video stores have a wide selection of mounts. Just make sure that your TV has the same mounting pattern as the mount, most new televisions are VESA mounts. the mounts that came in our Cruiser were compatable with both large and small VESA sizes.