Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 04-12-2010, 10:18 AM   #1
Seasonal Camper
 
gtoguy1967's Avatar
 
Join Date: Jan 2007
Location:
Posts: 479
What are you doing to level your camper ? I'm talking side to side. I have some 2 x 10 that I thought about cutting the length of the wheels and cutting a 45 on each end to be able to easily pull ip on them.

Then I thought about using a dowl that I could take out if I needed to stack them up. Thought I would see what every one else was doing. Right now I have a hodge podge of wood and I would like to clean up how I do it.
gtoguy1967 is offline   Reply With Quote
Old 04-12-2010, 10:23 AM   #2
Seasonal Camper
 
lenny's Avatar
 
Join Date: Jan 2009
Location: Whitecourt, AB
Posts: 317
I have four pieces of pressure treated 2"x6"x6', and 6 pieces 2"x6"x12". It seems to work well so far, but I may upgrade to something a little more "professional" down the road.
__________________
Ellen - Navigator
Boyd - Driver
09 Crossroads Seville VF35CK (Gone)

SOB 5er
lenny is offline   Reply With Quote
Old 04-12-2010, 10:25 AM   #3
Seasonal Camper
 
Join Date: Feb 2005
Location: Mid-Missouri
Posts: 458
I have2 X 10's in a length that will fit under both tires at once, then three that will fit under one tire.



They all store nicely in the side well of the basement storage of the 30SK.
__________________
2016 Duramax - 2010 CF30SKP

Viet Nam Vet 70-71 Da Nang

Real airplanes have two wings and big, round, engines
BipeFlier is offline   Reply With Quote
Old 04-12-2010, 10:33 AM   #4
Full Time Camper
 
Hunter11's Avatar
 
Join Date: Oct 2004
Location: Central Texas
Posts: 2,510
I took an treated 8' 2X6 and cut it in half. I have been using these for 5 years now with no issues. I see all kinds of fancy leveling blocks but I figure if it ain't broke why try and fix it.
__________________
17 Chevy 3500 DRW 4X4
16 Mobile Suites 36RSSB4
2 Mini Dachshunds
Hunter11 is offline   Reply With Quote
Old 04-12-2010, 11:56 AM   #5
Full Time Camper
 
Join Date: Oct 2004
Location: Texas
Posts: 1,508
I use treated 2x8's, two have a 45 degree cut on them. Sizes are such that I can get a full 3 inch lift for both tires and the 45's will be staggered by about 5 inches so that the tires are not going up the full incline at once. Some years ago I tried using door hinges so that a long board could be folded in half for easier storage, but it didn't take too long for the screws in the hinges to pull out, so I think that anything fancier than just loose boards is a waste of time. Some people use a few 3/4 inch thick boards, but I never worry about getting the unit that level. Besides, slightly off level in the right direction helps the tub drain better.
__________________
Larry Day

Texas Baptist Men-Retiree Builders member since '01
13 Silverado 3500HD D/A, 2wd CCSB srw, custom RKI bed
11 Cruiser CF32MK
https://www.picturetrail.com/dayle1
Dayle1 is offline   Reply With Quote
Old 04-12-2010, 11:58 AM   #6
Full Time Camper
 
artgpo's Avatar
 
Join Date: Jul 2009
Location: Texas
Posts: 780
We use plastic leveling blocks. They have successfully leveled the RV on the three or four times we needed their use. They store in convenient zippered carry bags.
__________________


Art and Karen
2013 Itasca Sunstar 35F, 2013 Ford C Max toad.
170 nights in 2013
132 in 2014
artgpo is offline   Reply With Quote
Old 04-12-2010, 12:18 PM   #7
Seasonal Camper
 
gtoguy1967's Avatar
 
Join Date: Jan 2007
Location:
Posts: 479
Sounds like I might be on the right track, I have about 6of the 2 x 10 cut in about 12' length's that I was thinking about screwing together too place under the jacks in the back, I would then be able to just add too if I needed more. I'm just tired of all the different pieces I have. What a mess it is under there.
gtoguy1967 is offline   Reply With Quote
Old 04-12-2010, 09:08 PM   #8
Full Time Camper
 
papa2's Avatar
 
Join Date: Aug 2007
Location: Michigan
Posts: 544

This is what I use. Quick set up, small to stow away. Easy to clean up. I've used 2x10s in the past cut to size but they are large, heavy, bulky, take time to dry out if wet and inconvenient to use.

Edited by: papa2
__________________
Al & Karyl

'08 Sunset Trail ST29RL

papa2 is offline   Reply With Quote
Old 04-12-2010, 09:14 PM   #9
Full Time Camper
 
fhenn's Avatar
 
Join Date: Jul 2006
Location: MS
Posts: 2,746
I also use the Lynx levers, I seem to get splinters in the hands when using wood. The lynx take up far less room and weigh a lot less

__________________
Frank and Janet Henn
2000 Monoco Lapalma
being pushed by a 2004 Jeep Grand Cherokee
Traveling with Rainbow the wonder dog and now with Sunshine the rescue Schnauzer.
fhenn is offline   Reply With Quote
Old 04-12-2010, 09:27 PM   #10
Full Time Camper
 
Join Date: Sep 2007
Location:
Posts: 1,415
I have the lynx also work good easy to store.
cwit is offline   Reply With Quote
Old 04-12-2010, 10:29 PM   #11
Full Time Camper
 
mwebber78's Avatar
 
Join Date: Jun 2008
Location: Maine
Posts: 1,250
Send a message via Yahoo to mwebber78
I was using the wood at first, I found some deals on CW branded Lynx style levelers so I have been using them with great sucess. As mentioned they are lighter and stack up nicely in their carrying case.



If you can't find a good deal on the Lynx or knock-off Lynx then the composite decking works nicely, it doesn't absorb water, mold or rot. I used some from a contractor's dump, LOL.
__________________
Mike
2013 Jayco Eagle 334RBTS
Crossroads Forum Lurker
mwebber78 is offline   Reply With Quote
Old 04-12-2010, 10:40 PM   #12
Seasonal Camper
 
Join Date: Mar 2007
Location: Ohio
Posts: 388
I bought 2 sets of Lynx Levelers last spring to replace my collection of pressure treated lumber levelers. I love them. They are lightweight, easy to store andtake up less space. I even run thevehicles up on them whento change oil (I still put a jack stands under it-you can't be too safe). Just my 2 cents.

Lonnie
__________________
07 Cruiser 29BT

04 2500 Hemi Ram Quad Cab
Chuck N. Wined is offline   Reply With Quote
Old 04-13-2010, 12:15 AM   #13
Seasonal Camper
 
shoetravel's Avatar
 
Join Date: Jul 2005
Location: WA
Posts: 270
I have 3 4 foot lengths of 2"X6" thatI use under the tires for side to side leveling.

For under the rear jack standsI cut a 4" wide block off a 4"X6" and then screwed a piece of3/8ths inch plywood on both sides. This keeps them from splitting over time. I added a rope handle on the side for easy carry. Ihave 4 of these so I can stack 'em when needed.

For under the front landing legs I used 4"X 8" blocks but cut to a wedge shape at about 30 degrees. They have about a 6"flat surface above the wedge. These serve multiple purpose. Usually they are under the front legs. But, I can use them under the tires if I need more leveling, the wedge helps to serve as a ramp. I have also used them as ramps when I have had to back up over a curb. These alsohave the 3/8ths plywood to prevent splitting.

I made all of the blocks about 8 years or more ago for my previous trailer and they are all holding up quite well. All the wood is pressure treat and was on hand so the only$$$ spent was on the bag of wood screws. Edited by: shoetravel
__________________
Patrick

2005 CF29RE 04 Ford F250 crew 6.0 P/stroke FX-4.

(pic coming soon!)
shoetravel is offline   Reply With Quote
Old 04-13-2010, 02:02 AM   #14
Full Time Camper
 
geondebi's Avatar
 
Join Date: Sep 2006
Location: Washington
Posts: 591
I am in there with Chuck. I used wood for the first year then CW had special and got two packs. Nice and easy to store and when you need to wash them off it is easy. However, both are very acceptable.

__________________
George and Debi
2006 F250 PSD, 2005 PF30CK
geondebi is offline   Reply With Quote
Old 04-13-2010, 02:43 AM   #15
Family Vacation Member
 
Korbe & Diana's Avatar
 
Join Date: Feb 2009
Location:
Posts: 160
As others have stated, 2x6's cut at a 45. I also screwed some cheap handles on the sides. They all get stored in an old milk crate.
__________________
Korbe & Diana

Northern California

2004 CF25RS

2004 F250 SD PSD



https://i632.photobucket.com/albums/u.../Truck5th2.jpg

Korbe & Diana is offline   Reply With Quote
Old 04-13-2010, 03:30 AM   #16
Family Vacation Member
 
ryeja's Avatar
 
Join Date: Jun 2009
Location: Alberta, Canada
Posts: 164
I also got tired of packing around various blocks of wood. Bought a set of Lynx Levelers (adult leggo blocks) in a Walmart in Vegas last year for $30.00 compared to $80 at local Canadian Tire or RV stores here. Last fall I fabricated somejack pads from some scrap 2x4 and 5/4 1x6pressure treated lumber. They are a little bulky butstore away alot better thanthe mix match of 2x6's and 2x4's I had previous and a lot more stable.
__________________
'08 CF31QB

'06 F-250 SD V-10

SCT custom tuned

https://i785.photobucket.com/albums/y...a/SDC12617.jpg
ryeja is offline   Reply With Quote
Old 04-13-2010, 05:01 AM   #17
Weekend Camper
 
kjones9820's Avatar
 
Join Date: Aug 2009
Location: Alabama
Posts: 98
We use the blocks from Camping World.They are similar to the Lynx.

http://www.campingworld.com/shopping...s-8-pack/43849
__________________
Kay and Teddy Jones

Jasper, AL

2009 30SK

[https://i565.photobucket.com/albums/s...andCruiser.jpg
kjones9820 is offline   Reply With Quote
Old 04-13-2010, 05:03 AM   #18
Family Vacation Member
 
delqcc's Avatar
 
Join Date: Jul 2005
Location: Kernersville NC
Posts: 209
ditto on the lynx (or equal) levelers, have been using for 9 years.
__________________
Daniel & Donna Leonard

Kernersville, NC

2011 Ram 4500 SLT 4x4

2005 PF36SK
delqcc is offline   Reply With Quote
Old 04-13-2010, 06:37 AM   #19
Family Vacation Member
 
csham's Avatar
 
Join Date: Apr 2007
Location: Near Pittsburgh
Posts: 204
Send a message via Yahoo to csham
I use the lynx, but sometimes they are not enough even though I have two sets. I have been considering a 2x10 or 2x8 that would be long enough to go under both wheels.



__________________
Chris & Ruth

Samantha (8/97), Tara (6/03), Erica (1/07)



2008 Dodge Ram 1500

2007 Sunset Trail ST30BH



https://i180.photobucket.com/albums/x...H-campsite.jpg
csham is offline   Reply With Quote
Old 04-13-2010, 08:08 AM   #20
Full Time Camper
 
salda01's Avatar
 
Join Date: Sep 2007
Location: SE Wi.
Posts: 704
I use the Camping World Legos and wood. Depending on what needs to get done. Sometimes the CW blocks go under the rear jacks and other times under the tires. I try not to extend the rear jacks more than 50% otherwise it I feel more bounce. As a whole is 2x6 cut at 45's under the tires.
__________________
https://i299.photobucket.com/albums/m...1/rally5-1.jpg

'07 F250 Diesel Crew Cab 4x4

'08 CF30QB

Reese Signature Slider 18k Hitch
salda01 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3
Disclaimer:

This website is not affiliated with or endorsed by Crossroads RV or any of its affiliates. This is an independent, unofficial site.


All times are GMT -6. The time now is 02:54 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×