Where is the locationfor the manual crank for the bedroom slide found the other two, however the bedroom slide is all sealed? hope its not as flimsy as the living room and kitchen hook up
I should prof read my question, I have the crank however we can't find out where to insert it, under bed is all enclosed with plywood, no holes anywhere or outside,like to try everything like this, so we dont have a hassle on a wet pacific northwest morning
You have to remove the top piece of wood over the slide mechanism under the bed and use a ratchet and socket on the bedroom slide to hand crank it. This post might help.
That does not sound like fun, especially if the slide is in, maybe I will make a hatch over the part to be cranked, have had two other brands had slide failures on both of them, murphys law says if you have two moving parts something will fail
Here is a picture of the slide motor under the bed. This is a PP but guess the Cruiser is the same. I have a socket and ratchet to take care of this task but would not look forward to doing it.
Thanks for the info and photo, looks like you could cut the cover and put on a hinge so you wouldn't have to remove the whole cover. Hope I never have to utilize it. There are hatch covers for the two main slide motor area's
Linear Mode
