Towel Bars

[geomahon]

I am looking for all of the ingenious ideas member have for towel bars and TP holders in their RV's.
Mine is a new CF30SK

[Dayle1]

For towel bars, I use flat aluminum stock, 1 inch x 1/8 inch thick. The top edge is then covered with chrome plastic auto door edge trim. I make wooden supports and stain them to match the cabinets. With an angled wall in the bathroom, house type of towel bars would not work.

[Stan]

I just screwed both of mine to the wall paneling. Been there for almost seven years with no issues. I also have a mirror that folds out from the wall when in use - also with no issues loosening.

[Kamper Dave]

We went with hooks instead of bars and a TP holder that
keeps the roll against the wall. We drilled pilot holes through the paneling
and dipped the screws into Gorilla Glue. We also forced a drop of Gorilla Glue
into the hole so that it could foam up and better hold each screw. 3 years and
they are still tight to the wall.

http://www.homedepot.com/Bath-Bathroom-Accessories-Hardware-Bathroom-Hardware/h_d1/N-25ecodZ5yc1vZbz9o/R-100557678/h_d2/ProductDisplay?catalogId=10053&langId=-1&storeId=10051&superSkuId=203600535

http://www.homedepot.com/Bath-Bathroom-Accessories-Hardware-Bathroom-Hardware/h_d1/N-25ecodZ5yc1vZbz9o/R-100565251/h_d2/ProductDisplay?catalogId=10053&langId=-1&storeId=10051&superSkuId=202618644

KD

[Hummer]

We just went to Walmart and got a heavy plastic over the door holder with six hooks for your towels. It works great and does not rub on the top of the door and does not hamper the closing of the door. I am still working out what to do with the toilet paper holder. Don't know if we want a stand for the floor or a wall or in the cubboard holder.

[Badwin]

We use a over the door rack with pieces of felt glued on the door touch points for the towels and a toilet paper holder that sits on the floor for the tp. We put the tp holder in the cupboard when we travel.
Brian

[Walkingstick]

our TP holder is on the inside of the door for the vanity. Bought shorter screws and installed it in there but you must be careful with alignment and it does nor interfere with shelf space. Our towel holders are mounted into the wallboard.