Wheel rating vs. Tire rating

[ijuba75]

I found out today from Crossroads that my aluminum rims (15") are rated at 60 psi. I have a cf30qb.





I just purchased Load range "e" ST tires rated at 80 psi from Denman.





Am I to interpret this to mean that I can only inflate my tires to 60 psi? If so, I would only be at 75% of the tire's rating.





Any opinions as to what trouble this might cause me with excessive

wear, under-performance......if any? I am concerned about being so

under-inflated (if my max is 60 psi).

Thanks.....

[ijuba75]

UPDATE -

Confounded with the info. I got from CR.....I went and checked the rims on my Cruiser myself and.....they are rated at 80 PSI.

That's the news I needed.

[pulpwood007]

Originally Posted by ijuba75

UPDATE -

Confounded with the info. I got from CR.....I went and checked the rims on my Cruiser myself and.....they are rated at 80 PSI.

That's the news I needed.

I'm assuming this info is stamped on the back of the wheel somewhere? I can't find a rating on mine. Can you tell me exactly the location?

thanks,

[ijuba75]

I got up underneath the rig and looked around the inside of the rim until I found it. Alot of info on the inner rim but, I eventually found it. "80 PSI Max".

Good luck.....

[JohnW]

I have seen some where it is stamped inside the rim.