slide

[vacationer]

Is there a way to get slide out by hand. The wires have come off the motor and I need to get at the retention screw at the back of the motor. I did not want to have to pull the caps off and trim on the out side of the slide. 2014 rushmore Lincoln front living room

[harley]

Shwintec slide? If so , philips head screw from outside upper .

[mark5w]

Schwintek slide.

https://www.youtube.com/watch?v=bGL4aILZYcY

How to release for manual use.

https://www.youtube.com/watch?v=YzqbvwCJpNU

[vacationer]

Thank you I have watched all the videos but where does it show how to get slide out far enough to access the retention screw. They all show how to get it in. The wires are broke of the right side motor so there is no power. I need to push it out manually some how to get at this screw. but the motor is engaged some how

[woodwalker]

Disconnect the cables on your batteries and you can push it out. It will take a good effort to move it. On another note you need power to these motors to keep the slide from moving out while taking corners while travelling

Originally Posted by vacationer

Thank you I have watched all the videos but where does it show how to get slide out far enough to access the retention screw. They all show how to get it in. The wires are broke of the right side motor so there is no power. I need to push it out manually some how to get at this screw. but the motor is engaged some how

Sent from my SM-G935V using Tapatalk