storage area cable connection

[concreteman]

I tried to hook a Tv up to my storage area cable connection last weekend and could not get a signal. I have a 2012 305 sk. Does anyone know how to get a signal at this location? I know the tv was on and workingble fine.

Also a more frustrating note. If anyone read my post about my black tank valve leaking into the under belly. After repairs were made under warranty, now the black tank valve leaks only when you open it to dump the tank! Going back to dealer on friday. It also may be the sana flush leaking. I love my unit, but black water leaking is starting to make me very angry!!!Also the new cable they installed is very stiff. The dealer says they hate the valves with cables. Also if I want them to install a valve with a rod to make it more trouble free that cross roads would not want to pay for the mod. I will try to keep you posted if anyone is interested.

[sleepyT]

Jeff -- take a look at the cable end. CR uses cheep cable connectors. In my 2007 SK I had to replace all the cable ends. Had to take off each plate to access coax cables. I have the tool and the cable ends that crimp on the end of the coax cable, instead of the screw on cable ends. Also make sure what size coax cable you have R59 (smaller) or RG6 (larger) cable. That will make a difference what size ends you buy.

[Berniross]

You might also check to be sure the antenna amplifier switch is on.

[concreteman]

Tom,

I will remove that plate and have a look at it. thanks

[fhenn]

If you are using cabel set up than that switch needs to be off