We have been "setting up" our new Cruiser 30SKP, and notice that the cable connection for the bedroom TV connects only to the cable/antenna connection.I want to hook up our satellite TV, and before I start drilling holes from the underneath compartment for a direct coaxial link to the dish I thought I'd check with this forum to see what others have done about this.
Thanks in advance for everyone's help.
Phil
I installed a splitter on the coax cable that goes from the TV amplifier to the bedroom. I accessed the cable from the back side of the fridge. I then ran a new short cable from the splitter and installed a coax jack plate inside the ent center. The output from the sat receiver plugs to this new jack. Since I have Dish, I can watch two different programs - one in each room and control each with a separate remote.
Linear Mode
